Netgear GSM7252PS ProSafe Managed Switch Web Management User Manual - Page 165
MST Port Status, Switching, Advanced, MST Port Configuration, MST ID, Interface, Port Priority
UPC - 606449071665
View all Netgear GSM7252PS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 165 highlights
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual MST Port Status Use the Spanning Tree MST Port Status page to configure and display Multiple Spanning Tree (MST) settings on a specific port on the switch. To display the Spanning Tree MST Port Status page, click Switching STP Advanced MST Port Configuration. Note: If no MST instances have been configured on the switch, the page displays a "No MSTs Available" message and does not display the fields shown in the field description table that follows. To configure MST port settings: 1. Use MST ID to select one MST instance from existing MST instances. 2. Use Interface to select one of the physical or port channel interfaces associated with VLANs associated with the selected MST instance. 3. Use Port Priority to specify the priority for a particular port within the selected MST instance. The port priority is set in multiples of 16. For example if the priority is attempted to be set to any value between 0 and 15, it will be set to 0. If it is tried to be set to any value between 16 and (2*16-1) it will be set to 16 and so on. 4. Use Port Path Cost to set the Path Cost to a new value for the specified port in the selected MST instance. It takes a value in the range of 1 to 200000000. Chapter 3. Configuring Switching Information | 165