Netgear GSM7252PS ProSafe Managed Switch Web Management User Manual - Page 354
IGMP Proxy Interface Configuration, Routing, Multicast, Interface, Admin Mode, Version
UPC - 606449071665
View all Netgear GSM7252PS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 354 highlights
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual IGMP Proxy Interface Configuration To display the IGMP Proxy Interface Configuration page, click Routing Multicast IGMP Proxy Interface Configuration. 1. Use Interface to select the port for which data is to be configured. You must have configured at least one router interface before configuring or displaying data for an IGMP Proxy interface and it should not be a IGMP routing interface. 2. Use Admin Mode to set the administrative status of IGMP Proxy on the selected interface. The default is disable. Routing, IGMP and Multicast global admin modes should be enabled to enable IGMP Proxy interface mode. 3. Use Version to enter the version of IGMP you want to configure on the selected interface. Valid values are (1 to 3) and the default value is 3. This field is configurable only when IGMP Proxy interface mode is enabled. 4. Use Unsolicited Report Interval to enter the unsolicited time interval value in seconds. The Unsolicited Report Interval is the time between repetitions of a host's initial report of membership in a group. Valid values are from (1 to 260). The default value is 1. 354 | Chapter 4. Routing