Netgear GSM7252PS ProSafe Managed Switch Web Management User Manual - Page 515
Captive Portal Configuration, Security, Control> Captive Portal
UPC - 606449071665
View all Netgear GSM7252PS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 515 highlights
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual Captive Portal Configuration By default, the switch has one captive portal. You can change the settings for that captive portal, and you can also create and configure up to nine additional portals. To display the Captive Portal Configuration page, click Security Control> Captive Portal CP Configuration. (Shown in two figures below.) 1. Use the CP ID pull-down menu to select the CP ID for which to create or update. 2. Use CP Name to enter the name of the configuration. Name can contain 1 to 31 alphanumeric characters. 3. Use Admin Mode to enable or disable this CP instance. 4. Use Protocol to choose whether to use HTTP or HTTPs as the protocol for the portal to use during the verification process: • HTTP - Does not use encryption during verification. • HTTPS - Uses the Secure Sockets Layer (SSL), which requires a certificate to provide encryption. The certificate is presented to the user at connection time. Chapter 6. Managing Device Security | 515