Netgear GSM7252PS ProSafe Managed Switch Web Management User Manual - Page 474

ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual and 65535. A quiet period value of 0 means that the authenticator state machine will never acquire a supplicant. The default value is 60. Changing the value will not change the configuration until the APPLY button is pressed. • Transmit Period - This input field allows the user to configure the transmit period for the selected port. The transmit period is the value, in seconds, of the timer used by the authenticator state machine on the specified port to determine when to send an EAPOL EAP Request/Identity frame to the supplicant. The transmit period must be a number in the range of 1 and 65535. The default value is 30. Changing the value will not change the configuration until the APPLY button is pressed. • GuestVLAN Id - This field allows the user to configure Guest Vlan Id on the interface. The valid range is 0-3965.The default value is 0. Changing the value will not change the configuration until the Apply button is pressed. Enter 0 to clear the Guest Vlan Id on the interface. • Guest VLAN Period - This input field allows the user to enter the guest Vlan period for the selected port. The guest Vlan period is the value, in seconds, of the timer used by the GuestVlan Authentication. The guest Vlan time-out must be a value in the range of 1 and 300. The default value is 90. Changing the value will not change the configuration until the Apply button is pressed. • Unauthenticated VLAN id - This input field allows the user to enter the Unauthenticated Vlan Id for the selected port. The valid range is 0-3965.The default value is 0. Changing the value will not change the configuration until the Submit button is pressed. Enter 0 to clear the Unauthenticated Vlan Id on the interface. • Supplicant Timeout - This input field allows the user to enter the supplicant time-out for the selected port. The supplicant time-out is the value, in seconds, of the timer used by the authenticator state machine on this port to time-out the supplicant. The supplicant time-out must be a value in the range of 1 and 65535. The default value is 30. Changing the value will not change the configuration until the Apply button is pressed. • Server Timeout - This input field allows the user to enter the server time-out for the selected port. The server time-out is the value, in seconds, of the timer used by the authenticator on this port to time-out the authentication server. The server time-out must be a value in the range of 1 and 65535. The default value is 30. Changing the value will not change the configuration until the APPLY button is pressed. • Maximum Requests - This input field allows the user to enter the maximum requests for the selected port. The maximum requests value is the maximum number of times the authenticator state machine on this port will retransmit an EAPOL EAP Request/Identity before timing out the supplicant. The maximum requests value must be in the range of 1 and 10. The default value is 2. Changing the value will not change the configuration until the APPLY button is pressed. • PAE Capabilities - This field selects the port access entity (PAE) functionality of the selected port. Possible values are "Authenticator" or "Supplicant". • Periodic Reauthentication - This select field allows the user to enable or disable reauthentication of the supplicant for the specified port. The selectable values are 'true' and 'false'. If the value is 'true' reauthentication will occur. Otherwise, 474 | Chapter 6. Managing Device Security