Netgear GSM7252PS ProSafe Managed Switch Web Management User Manual - Page 291

ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual Link State Database Use the OSPF Link State Database page to display OSPF link state information. To display the Link State Database page, click Routing OSPF Advanced  Link State Database. Table 35. Field Router ID Area ID LSA Type Description The 32-bit integer in dotted decimal format that uniquely identifies the router within the autonomous system (AS). The Router ID is set on the IP Configuration page. If you want to change the Router ID you must first disable OSPF. After you set the new Router ID, you must re-enable OSPF to have the change take effect. The default value is 0.0.0.0, although this is not a valid Router ID. The ID of an OSPF area to which one of the router interfaces is connected. An Area ID is a 32 bit integer in dotted decimal format that uniquely identifies the area to which an interface is connected. The format and function of the link state advertisement. One of the following: • Router Links • Network Links • Network Summary • ASBR Summary • AS-external Chapter 4. Routing | 291