Netgear GSM7252PS ProSafe Managed Switch Web Management User Manual - Page 452
Security > Access> HTTP, Configuration, Java Mode, Maximum Number of HTTP Sessions
UPC - 606449071665
View all Netgear GSM7252PS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 452 highlights
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual To access the HTTP Configuration page, click Security > Access> HTTP HTTP Configuration. To configure the HTTP server settings: 1. Use HTTP Access to specify whether the switch may be accessed from a web browser. If you choose to enable web mode you will be able to manage the switch from a web browser. The factory default is enabled. 2. Use Java Mode to enable or disable the java applet that displays a picture of the switch at the top right of the screen. If you run the applet you will be able to click on the picture of the switch to select configuration screens instead of using the navigation tree at the left side of the screen. The factory default is disabled. 3. Use HTTP Session Soft Timeout(Minutes) to set the inactivity time-out for HTTP sessions. The value must be in the range of (1 to 60) minutes. The default value is 5 minutes. The currently configured value is shown when the web page is displayed. 4. Use HTTP Session Hard Timeout(Hours) to set the hard time-out for HTTP sessions. This time-out is unaffected by the activity level of the session. The value must be in the range of (1 to 168) hours. The default value is 24 hours. The currently configured value is shown when the web page is displayed. 5. Use Maximum Number of HTTP Sessions to set the maximum allowable number of HTTP sessions. The value must be in the range of (0 to 16). The default value is 16. The currently configured value is shown when the web page is displayed. Table 6-86. Field Authentication List Description Shows the authentication list which HTTP are using. 452 | Chapter 6. Managing Device Security