Netgear GSM7252PS ProSafe Managed Switch Web Management User Manual - Page 266

ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual The source IP address is compared to the destination IP address of the route. The source IP netmask in the access list rule is treated as a wildcard mask, indicating which bits in the source IP address must match the destination address of the route. (Note that a 1 in the mask indicates a "don't care" in the corresponding address bit.) When an access list rule includes a destination IP address and netmask (an extended access list), the destination IP address is compared to the network mask of the destination of the route. The destination netmask in the access list serves as a wildcard mask, indicating which bits in the route's destination mask are significant for the filtering operation. RIP Route Redistribution Summary This screen displays the RIP Route Redistribution Configurations. Table 27. Field Source Metric Match Distribute List Description The Source Route to be Redistributed by RIP. The Metric of redistributed routes for the given Source Route. Displays "Unconfigured" when not configured. List of Routes redistributed when "OSPF" is selected as Source. The list may include one or more of: • Internal: Sets Internal OSPF Routes to be redistributed • External Type 1: Sets External Type 1 OSPF Routes to be redistributed • External Type 2: Sets External Type 2 OSPF Routes to be redistributed • NSSA External Type 1: Sets NSSA External Type 1 OSPF Routes to be redistributed • NSSA External Type 2: Sets NSSA External Type 2 OSPF Routes to be redistributed The Access List that filters the routes to be redistributed by the Destination Protocol. Displays 0 when not configured. OSPF From the OSPF link, you can access the following pages: • Basic on page 267 • Advanced on page 268 266 | Chapter 4. Routing