Netgear GSM7252PS ProSafe Managed Switch Web Management User Manual - Page 499

ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual DHCP Snooping Interface Configuration To display the DHCP Snooping Interface Configuration page, click Security  Control> DHCP Snooping  Interface Configuration. 1. Interface - Selects the interface for which data is to be configured. 2. If Trust Mode is enabled, DHCP snooping application considers as port trusted. The factory default is disabled. 3. If Logging Invalid Packets is enabled, DHCP snooping application logs invalid packets on this interface. The factory default is disabled. 4. Use Rate Limit(pps) to specify rate limit value for DHCP Snooping purpose. If the incoming rate of DHCP packets exceeds the value of this object for consecutively burst interval seconds, the port will be shutdown. If this value is None there is no limit. The factory default is 15pps (packets per second). The range of Rate Limit is (0 to 300). 5. Use Burst Interval(secs) to specify the burst interval value for rate limiting purpose on this interface. If the rate limit is None burst interval has no meaning shows it as N/A. The factory default is 1 second. The range of Burst Interval is 1 to 15). Chapter 6. Managing Device Security | 499