Netgear GSM7252PS ProSafe Managed Switch Web Management User Manual - Page 172
IGMP Snooping, IGMP Snooping Querier VLAN Configuration
UPC - 606449071665
View all Netgear GSM7252PS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 172 highlights
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual IGMP Snooping Internet Group Management Protocol (IGMP) Snooping is a feature that allows a switch to forward multicast traffic intelligently on the switch. Multicast IP traffic is traffic that is destined to a host group. Host groups are identified by class D IP addresses, which range from 224.0.0.0 to 239.255.255.255. Based on the IGMP query and report messages, the switch forwards traffic only to the ports that request the multicast traffic. This prevents the switch from broadcasting the traffic to all ports and possibly affecting network performance. A traditional Ethernet network may be separated into different network segments to prevent placing too many devices onto the same shared media. Bridges and switches connect these segments. When a packet with a broadcast or multicast destination address is received, the switch will forward a copy into each of the remaining network segments in accordance with the IEEE MAC Bridge standard. Eventually, the packet is made accessible to all nodes connected to the network. This approach works well for broadcast packets that are intended to be seen or processed by all connected nodes. In the case of multicast packets, however, this approach could lead to less efficient use of network bandwidth, particularly when the packet is intended for only a small number of nodes. Packets will be flooded into network segments where no node has any interest in receiving the packet. While nodes will rarely incur any processing overhead to filter packets addressed to unrequested group addresses, they are unable to transmit new packets onto the shared media for the period of time that the multicast packet is flooded. The problem of wasting bandwidth is even worse when the LAN segment is not shared, for example in full-duplex links. Allowing switches to snoop IGMP packets is a creative effort to solve this problem. The switch uses the information in the IGMP packets as they are being forwarded throughout the network to determine which segments should receive packets directed to the group address. From the IGMP Snooping link, you can access the following pages: • IGMP Snooping Configuration on page 173 • IGMP Snooping Interface Configuration on page 174 • IGMP VLAN Configuration on page 176 • Multicast Router Configuration on page 178 • Multicast Router VLAN Configuration on page 179 • IGMP Snooping Querier on page 180 • IGMP Snooping Querier Configuration on page 180 • IGMP Snooping Querier VLAN Configuration on page 182 172 | Chapter 3. Configuring Switching Information