Netgear GSM7252PS ProSafe Managed Switch Web Management User Manual - Page 601

ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual Traceroute IPv6 Use this screen to tell the switch to send a TraceRoute request to a specified IP address or Hostname. You can use this to discover the paths packets take to a remote destination. Once you click the Apply button, the switch will send traceroute and the results will be displayed below the configurable data. If a reply to the traceroute is received, you will see: • 1 a:b:c:d:e:f:g 9869 usec 9775 usec 10584 usec • 2 0:0:0:0:0:0:0:0 0 usec * 0 usec * 0 usec * • Hop Count = w Last TTL = z Test attempt = x Test Success = y. To display the Traceroute IPv6 page, click Maintenance  Troubleshooting  Traceroute IPv6. 1. Use IPv6 Address/Hostname to enter the IPv6 address or Hostname of the station you want the switch to discover path. The initial value is blank. The IPv6 Address or Hostname you enter is not retained across a power cycle. 2. Use Port to enter the UDP Dest port in probe packets. The initial value is default value. The port you enter is not retained across a power cycle. Chapter 8. Maintenance | 601