Netgear GSM7252PS ProSafe Managed Switch Web Management User Manual - Page 173
IGMP Snooping Configuration, Switching, Multicast, Snooping, Configuration, Admin Mode
UPC - 606449071665
View all Netgear GSM7252PS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 173 highlights
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual IGMP Snooping Configuration Use the IGMP Snooping Configuration page to configure the parameters for IGMP snooping, which is used to build forwarding lists for multicast traffic. Note that only a user with Read/Write access privileges may change the data on this screen. To access the IGMP Snooping Configuration page, click Switching Multicast IGMP Snooping Configuration. To configure IGMP Snooping: 1. Use the Admin Mode Enable/Disable radio button to select the administrative mode for IGMP Snooping for the switch. The default is disable. 2. Use the Unknown Multicast Filtering Enable/Disable radio button to select the unknown multicast filtering mode for the switch. The default is disable. The following table displays information about the global IGMP snooping status and statistics on the page. Table 3-63. Field Multicast Control Frame Count Interfaces Enabled for IGMP Snooping Data Frames Forwarded by the CPU VLAN Ids Enabled For IGMP Snooping Description The number of multicast control frames that are processed by the CPU. A list of all the interfaces currently enabled for IGMP Snooping. The number of data frames forwarded by the CPU. Displays VLAN Ids enabled for IGMP snooping. Chapter 3. Configuring Switching Information | 173