Netgear GSM7252PS ProSafe Managed Switch Web Management User Manual - Page 179
Multicast Router VLAN Configuration, Switching, Multicast, Snooping, Interface, VLAN ID
UPC - 606449071665
View all Netgear GSM7252PS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 179 highlights
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual Multicast Router VLAN Configuration This page configures the interface to only forward the snooped IGMP packets that come from VLAN ID () to the multicast router attached to this interface. The configuration is not needed most of the time since the switch will automatically detect the presence of a multicast router and forward IGMP packets accordingly. It is only needed when you want to make sure that the multicast router always receives IGMP packets from the switch in a complex network. To access the Multicast Router VLAN Configuration page, click Switching Multicast IGMP Snooping Multicast Router VLAN Configuration. 1. Use Interface to select the interface for which you want Multicast Router to be enabled or to be displayed. 2. Use VLAN ID to select the VLAN ID for which the Multicast Router Mode is to be Enabled or Disabled. 3. Use Multicast Router to enable or disable multicast router for the Vlan ID. Chapter 3. Configuring Switching Information | 179