Netgear GSM7252PS ProSafe Managed Switch Web Management User Manual - Page 309
Routing, OSPFv3, Advanced, Interface, Configuration, Area ID, Admin Mode, Admin Mode is enabled: State
UPC - 606449071665
View all Netgear GSM7252PS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 309 highlights
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual Interface Configuration Use the OSPFv3 Interface Configuration page to create and configure OSPFv3 interfaces. To display the Interface Configuration page, click Routing OSPFv3 Advanced Interface Configuration. 1. Interface - The interface for which data is to be displayed or configured. 2. Use Area ID to enter the 32-bit integer in dotted decimal format that uniquely identifies the OSPFv3 area to which the selected router interface connects. If you assign an Area ID which does not exist, the area will be created with default values. 3. Use Admin Mode* to select enable or disable. The default value is 'disable.' You can configure OSPFv3 parameters without enabling OSPFv3 Admin Mode, but they will have no effect until you enable Admin Mode. The following information will be displayed only if the Admin Mode is enabled: State, Designated Router, Backup Designated Router, Number of Chapter 4. Routing | 309