Netgear GSM7252PS ProSafe Managed Switch Web Management User Manual - Page 387
Last Member Query Count, Query Max Response Time
UPC - 606449071665
View all Netgear GSM7252PS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 387 highlights
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual 1. Use Interface to select the interface for which data is to be configured or displayed. 2. Use Admin Mode to set the administrative status of MLD on the selected interface. The default value is disable. 3. Use Version to enter the version to be configured on the selected interface. Valid values are(1 to 2). The default value is 2. 4. Use Query Interval to enter the frequency in seconds at which MLD host-query packets are to be transmitted on this interface. Valid values are from 1 to 1800. The default value is 125. 5. Use Query Max Response Time to enter the maximum query response time to be advertised in MLDv2 queries on this interface, in milliseconds. Valid values are from 0 to 65535. The default value is 10000 milliseconds. 6. Use Robustness to specify the robustness parameter for the selected interface. This variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to be lossy, the robustness variable may be increased. MLD is robust to (robustness variable-1) packet losses. 7. Use Startup Query Interval to specify the value that indicates the configured interval (in seconds) between General Queries sent by a Querier on startup. 8. Use Startup Query Count to specify the value that indicates the configured number of Queries sent out on startup, separated by the Startup Query Interval. 9. Use Last Member Query Interval to enter the last member query interval in milliseconds. This is the maximum response time to be inserted into group-specific queries sent in response to leave group messages, and is also the amount of time between group-specific query messages. Valid values are from 0 to 65535. The default value is 1000 milliseconds. 10. Use Last Member Query Count to enter the number of queries to be sent on receiving a leave group report. Valid values are from 1 to 20. The default value is 2. Table 76. Field Operational Mode Description The operational status of MLD on the Interface. Chapter 4. Routing | 387