Netgear GSM7252PS ProSafe Managed Switch Web Management User Manual - Page 69
UDP Relay Interface Configuration, UDP Port Other Value
UPC - 606449071665
View all Netgear GSM7252PS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual UDP Relay Interface Configuration To display the UDP Relay Interface Configuration page, click System > Services > UDP Relay> UDP Relay Interface Configuration. A screen similar to the following displays. 1. Use Interface to select an Interface to be enabled for the UDP Relay. 2. Use Server Address to specify the UDP Relay Server Address in x.x.x.x format. 3. Use UDP Port to specify UDP Destination Port. The following ports are supported: • DefaultSet - Relay UDP port 0 packets. This is specified if no UDP port is selected when creating a Relay server. • dhcp - Relay DHCP (UDP port 67) packets. • domain - Relay DNS (UDP port 53) packets. • isakmp - Relay ISAKMP (UDP port 500) packets. • mobile-ip - Relay Mobile IP (UDP port 434) packets • nameserver - Relay IEN-116 Name Service (UDP port 42) packets • netbios-dgm - Relay NetBIOS Datagram Server (UDP port 138) packets • netbios-ns - Relay NetBIOS Name Server (UDP port 137) packets • ntp - Relay network time protocol (UDP port 123) packets. • pim-auto-rp - Relay PIM auto RP (UDP port 496) packets. • rip - Relay RIP (UDP port 520) packets • tacacs - Relay TACACS (UDP port 49) packet • tftp - Relay TFTP (UDP port 69) packets • time - Relay time service (UDP port 37) packets • Other - If this option is selected, the UDP Port Other Value is enabled. This option permits the user to enter their own UDP port in UDP Port Other Value. 4. Use UDP Port Other Value to specify UDP Destination Port that lies between 0 and 65535. Chapter 2. Configuring System Information | 69