Netgear GSM7252PS ProSafe Managed Switch Web Management User Manual - Page 35
IPv6 Network Configuration, System, Management, Network, Interface > IPv6 Network Configuration
UPC - 606449071665
View all Netgear GSM7252PS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual IPv6 Network Configuration To display the IPv6 Network Configuration page, click System > Management > Network Interface > IPv6 Network Configuration. A screen similar to the following displays. The IPv6 network interface is the logical interface used for in-band connectivity with the switch via any of the switch's front panel ports. The configuration parameters associated with the switch's network interface do not affect the configuration of the front panel ports through which traffic is switched or routed To access the switch over an IPv6 network you must first configure it with IPv6 information (IPv6 prefix, prefix length, and default gateway). You can configure the IP information using any of the following: • IPv6 Auto Configuration • DHCPv6 • Terminal interface via the EIA-232 port Once you have established in-band connectivity, you can change the IPv6 information using any of the following: • Terminal interface via the EIA-232 port • Terminal interface via telnet • SNMP-based management • Web-based management Chapter 2. Configuring System Information | 35