Netgear GSM7252PS ProSafe Managed Switch Web Management User Manual - Page 503
IP Source Guard, IP Source Guard Interface Configuration
UPC - 606449071665
View all Netgear GSM7252PS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 503 highlights
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual IP Source Guard The IP Source Guard folder contains links to the following features: • IP Source Guard Interface Configuration on page 503 • IP Source Guard Binding Configuration on page 504 IP Source Guard Interface Configuration To display the IP Source Guard Interface Configuration page, click Security Control> IP Source Guard Interface Configuration. 1. Interface - Selects the interface to enable IPSG. 2. Use IPSG Mode to enable or disable validation of Sender IP Address on this interface. If IPSG is Enabled Packets will not be forwarded if Sender IP Address is not in DHCP Snooping Binding database. The factory default is disabled. 3. Use IPSG Port Security to enable or disables the IPSG Port Security on the selected interface. If IPSG Port Security is enabled then the packets will not be forwarded if the sender MAC Address is not in FDB table and it is not in DHCP snooping binding database. To enforce filtering based on MAC address other required configurations are: • Enable port-security Globally. • Enable port-security on the interface level. IPSG Port Security can't be Enabled if IPSG is Disabled. The factory default is disabled. Chapter 6. Managing Device Security | 503