Netgear GSM7252PS ProSafe Managed Switch Web Management User Manual - Page 231
IPv6 Global Configuration, Routing, Basic, Global, Configuration, IPv6 Unicast Routing
UPC - 606449071665
View all Netgear GSM7252PS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 231 highlights
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual IPv6 Global Configuration Use the Global Configuration page to enable IPv6 forwarding on the router and to enable the forwarding of IPv6 unicast datagrams. To display the IPv6 Global Configuration page, click Routing IPv6 Basic Global Configuration. 1. Use IPv6 Unicast Routing to globally enable or disable IPv6 unicast routing on the entity. 2. Use IPv6 Forwarding to enable or disable forwarding of IPv6 frames on the router. 3. Use the Hop Limit option to define the unicast hop count used in IPv6 packets originated by the node. The value is also included in router advertisements. Valid values for are 1-64 inclusive. The default "not configured" means that a value of zero is sent in router advertisements and a value of 64 is sent in packets originated by the node. Note that this is not the same as configuring a value of 64. 4. Use ICMPv6 Rate Limit Error Interval to control the ICMPv6 error packets by specifying the number of ICMP error packets that are allowed per burst interval. By Default Rate limit is 100 packets/sec i.e., burst interval is 1000 msec. To disable ICMP Ratelimiting set this field to '0'. Valid Rate Interval must be in the range 0 to 2147483647. 5. Use ICMPv6 Rate Limit Burst Size to control the ICMP error packets by specifying the number of ICMP error packets that are allowed per burst interval. Default burst size is 100 packets. When burst interval is 0 then configuring this field is not a valid operation. Valid Burst Size must be in the range 1 to 200. Chapter 4. Routing | 231