Yamaha A3000 Owner's Manual - Page 110

COMMAND Pages SMPDUMP (Sample Dump) Transmits a bulk dump of the selected sample. PLAY EDIT REC DISK UTILITY PROGRAM SAMPLE EASY EDIT TRIM / LOOP MAP / OUT FILTER RECORD SETUP METER PROGRAM SAMPLE SEQUENCE TOTAL EQ PANEL PLAY SEQUENCE EFFECT EG EFFECT VOLUME MASTER SETUP LFO EXT CTRL DISK SYSTEM CONTROL MIDI / CTRL MONITOR IMPORT MIDI Press the COMMAND key, then turn Knob 1 to select >SMPDUMP. Turn action Push action Knob 1 Knobs 2, 3 Knob 5 Knob 1 Knob 2 - Knob 3 - Knob 4 - Knob 5 - Use this page to dump a memory-resident sample or sample bank to an external MIDI device. The dump operation transmits all of the sample's data (or parameter data only; see below) to the external device. Important Before you can transmit or receive a sample dump, you must set matching device-number values at the A3000 and the external device. (310) Change Page >SMPDUMP • Turn the knob to change to a different command page. • Push the knob to execute the sample dump. The A3000 returns a confirmation screen. Push Knob 5 (>YES) to proceed, or Knob 4 (>NO) to cancel. Sample = sample name • Turn either knob to select the sample or sample bank that you want to dump. • If you select a sample bank: a [B] appears before the sample-bank name, and the operation name above Knob 5 changes from Format to withRelated. • Format • withRelated = norm, param, SDS#1,...,#1025 = off,on The selection here varies according to whether you are dumping a sample or a sample bank. • If you are dumping a sample, use the Format setting to select the dump format. Available formats are as follows. norm Transmit all data (wave and parameter) in A3000 format. param Transmit parameter data only, in A3000 format. 108 Chapter 4 PLAY Mode