Yamaha A3000 Owner's Manual - Page 180

MAP/OUT Function MAP/OUT - Pitch Sets the sample's pitch characteristics. PLAY EDIT REC DISK UTILITY PROGRAM SAMPLE EASY EDIT TRIM / LOOP MAP / OUT FILTER RECORD SETUP METER PROGRAM SAMPLE SEQUENCE TOTAL EQ PANEL PLAY SEQUENCE EFFECT EG EFFECT VOLUME MASTER SETUP LFO EXT CTRL DISK SYSTEM CONTROL MIDI / CTRL MONITOR IMPORT MIDI Turn Knob 1 to select Pitch. Turn action Push action Knob 1 Knob 2 Knob 3 Knob 4 Knob 5 Knob 1 Knob 2 - Knob 3 - Knob 4 -- Knob 5 Use this page to set the sample's tuning and pitch characteristics. Change Page Select P/S • Turn the knob to change to a different page within the MAP/OUT function. Available pages are: KeyRnge, VelRnge, Lvl&Mode, Output, Pitch (this page), Expand, and LvlScale. • Push the knob to move to the Program/Sample Selection screen. (95) Coarse = -127,...,+127 Turn the knob to adjust the sample's pitch, in semitone increments. Fine = -63,...,+63 Turn the knob to fine-tune the sample's pitch. Each click adjusts the pitch by 1.171875 cent. (Note: 100 cents = 1 semitone) Fixed = off, on Set this parameter on if you want the sample to play out at the same pitch over its entire key range. Random = 0,...,63 Use this setting to impart a slight, random pitch variation to the sample's pitch. Set to 0 to eliminate all random variation. Increase the value to produce a greater range of variation. Note that this variation is applied to each note at the start of its playback. This setting does not affect how pitch develops once the note has started playing. 178 Chapter 5 EDIT Mode