Yamaha A3000 Owner's Manual - Page 122

EASY EDIT Function Knobs 4, 5 Poly/Mono Poly/Mono switch 174 Poramento Portamento on/off 174 AlternateGrp "Alternate group" select 208 Main Output Main Output select 176 Main Out level Output level to main output 176 Assign Output Assignable-output select 176 Assign Out Lvl Output level to assignable output 176 MIDI ReceiveCH MIDI Receive Channel 208 MIDI Control MIDI Control enable/disable‡ 210 * You can use these settings only to reduce the sample's internally-set key range. Settings that would increase the internally-set key range are ineffective. (See next page.) † You can use these settings only to reduce the sample's internally-set velocity range. Settings that would increase this velocity range are ineffective. (See next page.) ‡ Selects whether the sample's own control settings are effective or ineffective. Value = parameter value Turn either of these knobs to set the value for the selected parameter. Available values differ for each parameter. • Values preceded by a + or - sign are applied as offsets to the sample's own setting. The applied value (sample setting plus offset) is indicated in parentheses to the right of the offset value. • If you set the value to =Sample, the program will use the sample's own setting. • The Key Limit and Velocity Limit settings can be used only to reduce the sample's locally set keyboard range and velocity range. You cannot set the Limit Low value below the sample's own low-limit setting; you cannot set the Limit High value above the sample's high-limit setting. For example, if the sample's locally set key range is "C2 to B3", then you may adjust the range to "C2 to B2," but not to "C2 to B4." 120 Chapter 4 PLAY Mode