Yamaha A3000 Owner's Manual - Page 258
Format a Partition
UPC - 027108936673
View all Yamaha A3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 258 highlights
COMMAND Pages PART_FMT (Format a Partition) Formats the selected partition. (Fast format). PLAY EDIT REC DISK UTILITY PROGRAM SAMPLE EASY EDIT TRIM / LOOP MAP / OUT FILTER RECORD SETUP METER PROGRAM SAMPLE SEQUENCE TOTAL EQ PANEL PLAY SEQUENCE EFFECT EG EFFECT VOLUME MASTER SETUP LFO EXT CTRL DISK SYSTEM CONTROL MIDI / CTRL MONITOR IMPORT MIDI Press the COMMAND key, then turn Knob 1 to select >PART_FMT. Turn action Push action Knob 1 Knob 2 Knob 3 Knob 1 Knob 2 - Knob 3 - Knob 4 - Knob 5 - Use this command to fast-format a specified partition on the SCSI disk. Important Formatting a partition causes loss of all data existing in that partition. FYI • You cannot use this command to format floppy disks. To format a floppy disk, use the FD_FMT command page. (258). • The A3000 uses a proprietary disk format for SCSI disks. This format is not recognized by computers and other foreign devices. Change Page >PART_FMT • Turn the knob to change to a different command page. • Push the knob when you are ready to execute the format. The A3000 returns a confirmation screen. Push Knob 5 (>YES) to proceed with the format, or Knob 4 (>NO) to cancel. ID = 0,...,7 Use this knob to select the SCSI ID of the disk containing the partition that you want to format. Be careful to select the correct ID; do not select the wrong disk, or an unused ID, or the ID of the A3000 itself. Partition = 1,...,8 Turn the knob to select the partition that you want to format, by its partition number. Note that the A3000 does not show partition numbers for non-existent partitions. 256 Chapter 7 DISK Mode