Yamaha A3000 Owner's Manual - Page 195
Knob 1, Change Select P/S, Knob 3, Knob 4, Knob 5
UPC - 027108936673
View all Yamaha A3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 195 highlights
EG Function Knob 1 Knob 3 Knob 4 Knob 5 Important Filter-EG settings are not effective if the Type parameter on the Filter page (182) is set to Bypass. Change Page Select P/S • Turn the knob to change to a different page within the EG function. Available pages are: AEG, AEGMode, FEGRate(this page), FEGLevel, FEGMode, PEGRate, PEGLevel, and PEGMode. • Push the knob to move to the Program/Sample Selection screen. (95) Attack = 0,...,127 This value sets the rate at which the cutoff frequency moves from its initial level (at Note On) to the attack level. Higher values produce faster rates. Decay = 0,...,127 This value sets the rate at which the cutoff frequency moves from the attack level to the sustain level. Higher values produce faster rates. Release = 0,...,127 This value sets the rate at which the cutoff frequency moves from the sustain level to the release level following Note Off. Higher values produce faster rates. Note that the effectiveness of this setting declines at higher AEG release rates (189), since the sound dies out before the shift in cutoff frequency can be heard. Chapter 5 Chapter 5 EDIT Mode 193