Yamaha A3000 Owner's Manual - Page 196

EG Function EG - FEGLevel (Filter-EG Levels) Sets the levels for the filter EG. PLAY EDIT REC DISK UTILITY PROGRAM SAMPLE EASY EDIT TRIM / LOOP MAP / OUT FILTER RECORD SETUP METER PROGRAM SAMPLE SEQUENCE TOTAL EQ PANEL PLAY SEQUENCE EFFECT EG EFFECT VOLUME MASTER SETUP LFO EXT CTRL DISK SYSTEM CONTROL MIDI / CTRL MONITOR IMPORT MIDI Turn Knob 1 to select FEGLevel. Turn action Push action Knob 1 Knob 2 Knob 1 Knob 2 Knob 3 Knob 4 Knob 5 - - - - Use this page together with the FEGRate page (192) to set up the sample's FEG (filter envelope generator). The FEG determines how the filter's cutoff frequency shifts over time as each note plays out. The FEGLevel page (this page) sets the FEG's levels (initial, attack, sustain, and release). The FEGRate page sets the FEG's various rates (attack, decay, and release rates). Important • It is not possible to set the actual cutoff frequency beyond a certain range. Regardless of settings you make at this page, the cutoff frequency will not shift beyond these limits. • Filter-EG settings are not effective if the Type parameter on the Filter page (182) is set to Bypass. Change Page Select P/S • Turn the knob to change to a different page within the EG function. Available pages are: AEG, AEGMode, FEGRate, FEGLevel (this page), FEGMode, PEGRate, PEGLevel, and PEGMode. • Push the knob to move to the Program/Sample selection screen. (95) Init = -127,...,+127 This value sets the initial level (the cutoff-frequency offset applied at time of Note On). 194 Chapter 5 EDIT Mode