Yamaha A3000 Owner's Manual - Page 297

PANEL PLAY Function Knob 3 Knob 4 Knob 5 T-ch = 1,...,16, Bch MIDI IN • Use this knob to set the "Transmit" channel for the selected function key. The setting determines the MIDI channel over which the Note-On message is transmitted. • Set the value to Bch if you want to use the channel selected by the BasicCh parameter in the UTILITY | MIDI Receive page (305). • Push the knob if you want to set the channel from an external MIDI device. The knob indicator begins blinking, indicating that the A3000 is ready to receive MIDI input. Now transmit any note to the A3000 over the appropriate channel; the A3000 detects the channel and displays the value over the knob. Lock in the setting in by pushing the knob again or changing to a different screen. Note = C-2,...,G8 MIDI IN • Use this knob to set the note to be played by the selected function key. The setting determines the note value that the key transmits when sending a Note-On message. • To set the value from an external MIDI device: Push the knob (so that the indicator begins blinking), then transmit the appropriate Note-On value. (See explanation directly above.) • You can use the Note setting in the UTILITY | SYSTEM Display page (302) to select whether note values are shown by name ("C-2" to "G8") or by the corresponding MIDI note number ("0" to "127"). Velocity = 1,...,127 MIDI IN • Use this knob to set the velocity for selected function key. The setting determines the velocity value that the key transmits when sending a Note-On message. • To set the value from an external MIDI device: Push the knob (so that the indicator begins blinking), then transmit any note using the appropriate velocity. (See explanation directly above.) • You can use the Note setting in the UTILITY | SYSTEM Display page (302) to select whether note values are shown by name ("C-2" to "G8") or by the corresponding MIDI note number ("0" to "127"). Chapter 8 Chapter 8 UTILITY Mode 295