Yamaha A3000 Owner's Manual - Page 179
ASL&R, DIG&OUT
UPC - 027108936673
View all Yamaha A3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 179 highlights
MAP/OUT Function Knob 4 Knob 5 AsgnPut = off, ASL&R, (AS1&2, AS3&4, AS5&6, DIG&OPT) • Selects the assignable-output destination for sample's output signal • Set this value to off if you do not want to output the signal to any assignable output. Set the value to ASL&R if you want to output the signal to the A3000's standard assignable-output pair. The other settings are meaningful only if you have installed the optional I/O expansion board (AIEB1 board); if the board is not installed, these settings are equivalent to off. • If you have installed the AIEB1 board, you may also select from among the other assignable-output pairs indicated above. If you select DIG&OUT, the A3000 outputs the identical signal to both the DIGITAL and the OPTICAL output connectors. AsLevel = 0,...,127 Sets the output level to the assignable outputs. Chapter 5 Chapter 5 EDIT Mode 177