Yamaha A3000 Owner's Manual - Page 210

MIDI/CTRL Function MIDI/CTRL Function You use the MIDI/CTRL function to set the sample's MIDI Receive Channel, to designate its "alternate group," and to set up its controller handling. FYI The COMMAND key gives you rapid access to a number of helpful commands while you are working with this function. For example, you can use the COMMAND key when you want to save your edit results to disk, or when you want to cancel your new changes and restore the previously saved data. (147) MIDI/CTRL - RCh&Alt (Receive Channel and Alternate Sets the sample's MIDI Receive Channel and "alternate group." PLAY EDIT REC DISK UTILITY PROGRAM SAMPLE EASY EDIT TRIM / LOOP MAP / OUT FILTER RECORD SETUP METER PROGRAM SAMPLE SEQUENCE TOTAL EQ PANEL PLAY SEQUENCE EFFECT EG EFFECT VOLUME MASTER SETUP LFO EXT CTRL DISK SYSTEM CONTROL MIDI / CTRL MONITOR IMPORT MIDI Turn Knob 1 to select RCh&Alt. Turn action Push action Knob 1 Knob 1 Knob 2 Knob 3 - Knob 4 - Knob 5 - You use this page to set the sample's MIDI Receive Channel, and to assign the sample to an "alternate group." Important If you set the sample into an alternate group (if you set the AlternateGroup parameter to any value other than "off"), you will not be able to play more than one note at a time from the sample, since each new note from the sample automatically switches off any preceding note from the sample. Change Page Select P/S • Turn the knob to change to a different page within the MIDI/CTRL function. Available pages are: RCh&Alt (this page), SmpCtl1, SmpCtl2, and Vel&PB. • Push the knob to move to the Program/Sample Selection screen. (95) 208 Chapter 5 EDIT Mode