Yamaha A3000 Owner's Manual - Page 134

SETUP Function SETUP - ADSetup (A/D-In Setup) Sets the A/D-in feature on or off, and sets the A/D-input source and pan. PLAY EDIT REC DISK UTILITY PROGRAM SAMPLE EASY EDIT TRIM / LOOP MAP / OUT FILTER RECORD SETUP METER PROGRAM SAMPLE SEQUENCE TOTAL EQ PANEL PLAY SEQUENCE EFFECT EG EFFECT VOLUME MASTER SETUP LFO EXT CTRL DISK SYSTEM CONTROL MIDI / CTRL MONITOR IMPORT MIDI Turn Knob 1 to select ADSetup. Turn action Push action Knob 1 Knob 2 Knob 3 Knob 1 Knob 2 - Knob 3 - Knob 4 - Knob 5 - The A/D-input feature lets you feed an acoustic signal from an external device (typically a microphone) through the A3000. You can set the signal to receive any one of the program's three effects, or you can relay the signal through the A3000 without change. You use this page to set the program's A/D-Input feature on or off, and to set the A/D input source and pan. Important It is not possible to use the digital connectors on the optional I/O expansion board (AIEB1 board) as the A/D input source. Change Page Select P/S • Turn the knob to change to a different page within the SETUP function. Available pages are: PgmMstr, Portmnt, ADSetup (this page), and ADOut. • Push the knob to move to the Program/Sample Selection screen. (95) A/D In = off, on Turn this knob to switch the A/D-input feature on or off. Source = L/R, L+R, L Selects the input for the acoustic signal. L/R Use input stereo signal; handle the signal as stereo. L+R Use input stereo signal, but handle as monaural (mix the incom- ing L-channel and R-channel signals). L Use monaural input received on the left channel. (Select this setting when using a monaural microphone. Be sure to connect the microphone to the "L" connector on the A3000.) 132 Chapter 4 PLAY Mode