Yamaha A3000 Owner's Manual - Page 348
WhiteRm WHITE ROOM, 52: Tunnel TUNNEL, 53: Basemnt BASEMENT, 54: Canyon CANYON
UPC - 027108936673
View all Yamaha A3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 348 highlights
Effect parameter list 51: WhiteRm (WHITE ROOM), 52: Tunnel (TUNNEL), 53: Basemnt (BASEMENT), 54: Canyon (CANYON) 1 Dry/Wet Balance 2 Reverb Time 3 Diffusion 4 Initial Delay 5 HPF Cutoff Freq 6 LPF Cutoff Freq 7 Width 8 Height 9 Depth 10 Wall Vary 11 Reverb Delay 12 Density 13 Er/Rev Balance 14 Feedback High Damp 15 Feedback Level D63>W ~ D=W ~ DR ~ E=R ~ E
Effect parameter list
346
Appendix
51: WhiteRm (WHITE ROOM), 52: Tunnel (TUNNEL), 53: Basemnt (BASEMENT), 54: Canyon (CANYON)
1
Dry/Wet Balance
D63>W ~ D=W ~ D<W63
Balance of the dry sound and effect sound
2
Reverb Time
0.3~30.0s
Reverb length
3
Diffusion
0~10
Spread of the reverb
4
Initial Delay
0.1~99.3ms
Delay time until the early reflections
5
HPF Cutoff Freq
Thru~8.0kHz
Frequency at which the high pass filter will cut the low range
6
LPF Cutoff Freq
1.0kHz~Thru
Frequency at which the low pass filter will cut the high range
7
Width
0.5~10.2m
Width of the simulated room
8
Height
0.5~20.2m
Height of the simulated room
9
Depth
0.5~30.2m
Depth of the simulated room
10
Wall Vary
0~30
Wall surface of the simulated room (higher values produce more random reflections)
11
Reverb Delay
0.1~99.3ms
Delay time from the early reflections until the reverberation
12
Density
0~4
Density of the reverberation
13
Er/Rev Balance
E63>R ~ E=R ~ E<R63
Level balance of the early reflections and the reverberation
14
Feedback High Damp
0.1~1.0
High range attenuation (lower values cause the high range to decay faster)
15
Feedback Level
-63~+63
Amount of feedback for the initial delay