Yamaha A3000 Owner's Manual - Page 243

EXT CTRL Function EXT CTRL Function You use this function to control playback of an audio CD from an external CD-ROM drive (SCSI drive). This feature lets you record samples from CD playback. Important To record CD playback, you must first connect the Analog Out (or Audio Out) connector from the CD-ROM drive to the analog input(s) on the A3000's front panel. You must also select use of analog input by setting the Input parameter (on the RecData page; 227) to AD L/R or AD L. EXT CTRL - CD-ROM Selects the CD-ROM drive (by its SCSI ID). PLAY EDIT REC DISK UTILITY PROGRAM SAMPLE EASY EDIT TRIM / LOOP MAP / OUT FILTER RECORD SETUP METER PROGRAM SAMPLE SEQUENCE TOTAL EQ PANEL PLAY SEQUENCE EFFECT EG EFFECT VOLUME MASTER SETUP LFO EXT CTRL DISK SYSTEM CONTROL MIDI / CTRL MONITOR IMPORT MIDI Turn Knob 1 to select CD-ROM. Turn action Push action Knob 1 Knob 2 Knob 1 Knob 2 - Knob 3 - Knob 4 - Knob 5 - Use this page to designate the CD-ROM drive that you want to control. You designate the drive by selecting its SCSI ID. Change Page Select P/S • Turn the knob to switch between the function's CD-ROM and CD-DA pages. • Push the knob to move to the Program/Sample Selection screen. (95) SCSI ID = 0,...,7 Turn the knob to select the SCSI ID of the CD-ROM drive that you want to record from. The right side of the screen indicates the name (and manufacturer) of the device connected to the currently selected SCSI ID. Turn the knob until you see the name (manufacturer) of the CD-ROM drive that you want to use. Chapter 6 Chapter 6 RECORDING Mode 241