Yamaha A3000 Owner's Manual - Page 327
Connect the SCSI interface board to the hard disk., Using the red/white cable hard disk power supply
UPC - 027108936673
View all Yamaha A3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 327 highlights
Installing an Internal Hard Disk 6. Connect the SCSI cable for the hard disk to the connector of the SCSI interface board as shown in the illustration. When connecting the cable, support the SCSI board from the bottom and avoid excessive force on the board. Also, set the SCSI board's terminator switch to OFF at this time. 7. Connect the SCSI interface board to the hard disk. Connect the free end of the flat SCSI cable (connected to the SCSI interface board) to the connector on the hard disk. The connectors are notched to ensure that you connect in the right direction. 8. Using the red/white cable (hard disk power supply cable), connect the hard disk to the A3000. Begin by connecting one end of the 4-wire red/white cable (hard disk power supply cable) to the connector on the hard disk. Appendix 325 Appendix