Yamaha A3000 Owner's Manual - Page 137
AsgnPut, ASL&R, AS1&2, AS3&4, AS5&6, DIG&OPT, AsLevel
UPC - 027108936673
View all Yamaha A3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 137 highlights
SETUP Function Knob 4 Knob 5 AsgnPut off, ASL&R, AS1&2, AS3&4, AS5&6, DIG&OPT • Selects the assignable-output destination for the A/D-input signal. • Set this value to off if you do not want to output the signal to any assignable output. Set the value to ASL&R if you want to output the signal to the A3000's standard assignable-output pair. The other settings are meaningful only if you have installed the optional I/O expansion board (AIEB1 board); if the board is not installed, these settings are equivalent to off. • If you have installed the AIEB1 board, you may also select from among the other assignable-output pairs indicated above. If you select DIG&OUT, the A3000 will output the identical signal to both the DIGITAL and the OPTICAL output jacks. AsLevel = 0,...,127 Sets the output level at the assignable outputs. Chapter 4 Chapter 4 PLAY Mode 135