Yamaha A3000 Owner's Manual - Page 158
Knob 3, Knob 4
UPC - 027108936673
View all Yamaha A3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 158 highlights
COMMAND Pages Knob 3 Curve = -exponent, linear, +exponent This setting selects the curve type for the fade. Three types are available, as illustrated below. Fade-In Curves -exponent Level linear Level +exponent Level Fade-Out Curves -exponent Level Time linear Level Time +exponent Level Time Knob 4 Time Time Time Length 0,...,(end address - start address) Turn the knob to set the length for the fade, in "address" units. The minimum length is 0 (no fade). The maximum length is equal to the entire playback length of the waveform (the length from the start address to the end address). Note again that fade-in always begins from the start address, while fade-out always ends at the end address. 156 Chapter 5 EDIT Mode
COMMAND Pages
156
Chapter 5
EDIT Mode
Knob 3
Curve
=
-exponent
,
linear
,
+exponent
This setting selects the curve type for the fade. Three types are available, as
illustrated
below.
Level
-exponent
Fade-In Curves
Time
Level
linear
Time
Level
+exponent
Time
Level
-exponent
Fade-Out Curves
Time
Level
linear
Time
Level
+exponent
Time
Knob 4
Length
0
,...,(
end address
-
start address
)
Turn the knob to set the length for the fade, in “address” units. The minimum length is
0 (no fade). The maximum length is equal to the entire playback length of the waveform
(the length from the start address to the end address).
Note again that fade-in always begins from the start address, while fade-out always ends
at the end address.