Yamaha A3000 Owner's Manual - Page 202

EG Function EG - PEGLevel (Pitch-EG Levels) Sets the levels for the pitch EG. PLAY EDIT REC DISK UTILITY PROGRAM SAMPLE EASY EDIT TRIM / LOOP MAP / OUT FILTER RECORD SETUP METER PROGRAM SAMPLE SEQUENCE TOTAL EQ PANEL PLAY SEQUENCE EFFECT EG EFFECT VOLUME MASTER SETUP LFO EXT CTRL DISK SYSTEM CONTROL MIDI / CTRL MONITOR IMPORT MIDI Turn Knob 1 to select PEGLevel. Turn action Push action Knob 1 Knob 2 Knob 3 Knob 4 Knob 5 Knob 1 Knob 2 Knob 3 Knob 4 Knob 5 - - - - Use this page together with the PEGRate page (198) to set up the sample's PEG (pitch envelope generator). The PEG determines how the pitch varies over time as each note plays out. The PEGLevel page (this page) sets the PEG's levels (initial, attack, sustain, and release). The PEGRate page sets the PEG's various rates (attack, decay, and release rates). Change Page Select P/S • Turn the knob to change to a different page within the EG function. Available pages are: AEG, AEGMode, FEGRate, FEGLevel, FEGMode, PEGRate, PEGLevel (this page), and PEGMode. • Push the knob to move to the Program/Sample Selection screen. (95) Init = -127,...,+127 This value sets the initial level (the pitch offset applied at time of Note On). Attack = -127,...,+127 This value sets the attack level. (See illustration, page 198.) Sustain = -127,...,+127 This value sets the sustain level. (See illustration, page 198.) Release = -127,...,+127 This value sets the release level. (See illustration, page 198.) 200 Chapter 5 EDIT Mode