Yamaha A3000 Owner's Manual - Page 24

Connecting the A3000 Outputs Connecting the A3000 Outputs This section explains how to connect the A3000 audio outputs to external devices. Important • Be sure that power to the A3000 and to peripheral devices is OFF before making these connections. Connecting devices while power is ON may result in damage to amps or speakers. • Digital I/O connections are available only if the optional AIEB1 board is installed. Connecting the Analog Outputs The A3000 comes standard with the following stereo output jacks. STEREO OUT Main analog output. ASSIGNABLE OUT You can set the jacks to operate independently of the STEREO OUT jacks, so that they output selected samples or programs only. The feature is useful, for example, when you want to send the main signal to one audio device while sending a specific sample to a different device. But it is also possible to set these jacks so that they output the same signal as the STEREO OUT jacks. (299) If you have installed the optional I/O expansion board (AIEB1 board), your A3000 will include three additional ASSIGNABLE OUT pairs (ASSIGNABLE OUT jacks 1 to 6). For monaural output: A3000 Rear Panel ASSIGNABLE OUT R L STEREO OUT R L/MONO Amp, mixer, etc. INPUT 22 Chapter 1 Setting Up