Yamaha A3000 Owner's Manual - Page 217

MIDI/CTRL Function MIDI/CTRL - Vel&PB (Velocity and Pitchbend) Sets the sample's handling of velocity and pitchbend input. PLAY EDIT REC DISK UTILITY PROGRAM SAMPLE EASY EDIT TRIM / LOOP MAP / OUT FILTER RECORD SETUP METER PROGRAM SAMPLE SEQUENCE TOTAL EQ PANEL PLAY SEQUENCE EFFECT EG EFFECT VOLUME MASTER SETUP LFO EXT CTRL DISK SYSTEM CONTROL MIDI / CTRL MONITOR IMPORT MIDI Turn Knob 1 to select Vel&PB. Turn action Push action Knob 1 Knob 2 Knob 1 Knob 2 Knob 3 - Knob 4 - Knob 5 - You use this page to set the sample's minimum velocity, velocity offset, and pitchbend handling. FYI Upon receiving a Note-On message, the A3000 first checks that the velocity value is within the range specified by the EDIT | MAP/OUT VelRnge page (173). If the velocity is outside of this range, the A3000 does not play the note. If the velocity is inside the range, the A3000 adjusts the velocity according to the minimum and offset values that you set here, and then applies additional adjustment in accordance with the VelocityCurve setting on the UTILITY | MIDI Adjust page. Change Page Select P/S • Turn the knob to change to a different page within the MIDI/CTRL function. Available pages are: RCh&Alt, SmpCtl1, SmpCtl2, and Vel&PB (this page). • Push the knob to move to the Program/Sample Selection screen. (95) VelLow = 0,...,127 MIDI IN • Turn the knob to select the minimum velocity for note replay. Whenever the A3000 receives a Note-On message with a lower velocity, it will automatically raise the velocity to the value given here. • If you wish to set the value from an external MIDI keyboard: Push the knob so that the knob indicator begins blinking, then play any note using the appropriate velocity (force). The velocity value will appear on the screen directly above the knob. Lock the setting in by pressing the knob again or by moving to a different page. Chapter 5 Chapter 5 EDIT Mode 215