Yamaha A3000 Owner's Manual - Page 22

Setting Up Setting Up This chapter explains how to set up your equipment and run a simple sound check. Setup Sequence This chapter takes you through each of the steps necessary to connect up your system. Connecting the Power Explains how to connect up the A3000's power cord. (21) Connecting the A3000 Outputs Shows how to connect the A3000's stereo and assignable outputs to external audio devices. (22) Connecting the Audio Inputs Shows how to connect microphones and other input devices to the A3000. (25) MIDI Connections Introduces basic MIDI concepts, and shows how to connect up MIDI devices. (27) Power ON/OFF Explains the proper sequence for turning connected devices on and off. (30) Sound Check Takes you through a simple sound check, to confirm that your equipment is connected correctly. (32) Important If you have purchased SIMM expansion memory, the AIEB1 expansion board, or an internal hard disk for your A3000, or if you need to connect up an external SCSI disk, please be sure to install this equipment before going through the procedures given in this manual. For installation and connection information, please refer to the following pages. • SIMM modules 312 • AIEB1 board 316 • Internal SCSI hard drive 326 • External SCSI drive 331 20 Chapter 1 Setting Up