Yamaha A3000 Owner's Manual - Page 142
Range
UPC - 027108936673
View all Yamaha A3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 142 highlights
CONTROL Function Knob 4 +offset -/+offset The A3000 converts the received value (0 to 127) to a corresponding value in the range {0 to range}, and adds the result to the target parameter. Notice that the resulting offset is therefore always positive (or always negative, depending on the Range sign; see below). In other words, the controller can offset the target parameter in one direction only. The A3000 converts the received value (0 to 127) to a corresponding value in the range {-range to 0 to +range}, and adds the result to the target parameter. Notice that in this case the controller applies 0 offset when at its center position; displacement in one direction generates a negative offset, while displacement in the other generates a positive offset. Range = -63,...,+63 Sets the maximum offset that the controller can apply to the target parameter. This also determines how sensitive the parameter is to changes in the controller position. • A value of 0 disables the controller completely. • A value of +63 or -63 allows the controller to have full effect. • A negative setting reverses the controller's normal direction. For example, moving a volume dial clockwise will increase the volume if the setting is positive, but will decrease the volume if the setting is negative. 140 Chapter 4 PLAY Mode