Yamaha A3000 Owner's Manual - Page 126

EFFECT Function EFFECT - Efct1,...,Efct3 (Edit the Effects) Use this page to edit the effects selected for the current program. The page's appearance and operation varies according to whether "EffectEditType" value is set to "full" or "favorite" (127). s If "EffectEditType" is set to "full", the page appears as follows. Sets parameters for the selected effect (Effect 1, 2, or 3). PLAY EDIT REC DISK UTILITY PROGRAM SAMPLE EASY EDIT TRIM / LOOP MAP / OUT FILTER RECORD SETUP METER PROGRAM SAMPLE SEQUENCE TOTAL EQ PANEL PLAY SEQUENCE EFFECT EG EFFECT VOLUME MASTER SETUP LFO EXT CTRL DISK SYSTEM CONTROL MIDI / CTRL MONITOR IMPORT MIDI Turn Knob 1 to select Efct1, Efct2, or Efct3. Turn action Push action Knob 1 Knobs 2, 3 Knob 5 Knob 1 Knob 2 - Knob 3 - Knob 4 - Knob 5 - Use this page to set parameter values for the selected effect (Effect 1, 2, or 3). You can access and set all of the effect's parameters. Change Page Select P/S • Turn the knob to change to a different page within the EFFECT function. Available pages are: EfType, Efct1, Efct2, Efct3, In&Out, and EdType. • Push the knob to move to the Program/Sample Selection screen. (95) Parameter = parameter name Turn either knob to select the parameter whose value you want to view or set. You can then set the value using Knob 5. You can repeat the sequence to set each of the available parameters: first select the parameter with Knob 2 or 3, and then set the value with Knob 5. Note that the available parameters differ for each effect type. For a listing of parameters and their meanings, refer to the "Effect parameter list" in the Appendix. (337) Value = value Turn the knob to set the value for the parameter selected by Knob 2 or 3. 124 Chapter 4 PLAY Mode