Yamaha A3000 Owner's Manual - Page 14

Panel and Connector Arrangement Rear Panel (5) (1) (2) (3) (4) (1) AC inlet Connects to the AC power cord supplied with the A3000. (Please do not use any other power cord with this unit.) (2) MIDI connectors These connectors link the A3000 to external MIDI devices. The MIDI IN connector receives MIDI signals, while the MIDI OUT connector transmits MIDI data generated by the A3000. The MIDI THRU connector relays the MIDI signals received at the MIDI IN connector. (3) ASSIGNABLE OUT jacks Analog output jacks. These jacks operate independently of the STEREO OUT jacks. You can use these jacks to output the sound of one or more selected samples, or to output the signal supplied through the front panel's analog input connectors (134, 176). You may also set them so that they output the same signal as the STEREO OUT jacks (299). (4) STEREO OUT jacks These are the main analog output jacks. (5) SCSI connector This is a half-pitch 50-pin connector. You use it to connect up a SCSI hard drive, CDROM drive, or other SCSI device. 12