Yamaha A3000 Owner's Manual - Page 143

Chapter 4 CONTROL Function CONTROL - Reset (Controller Reset) Selects whether controllers initialize when you switch into this program. PLAY EDIT REC DISK UTILITY PROGRAM SAMPLE EASY EDIT TRIM / LOOP MAP / OUT FILTER RECORD SETUP METER PROGRAM SAMPLE SEQUENCE TOTAL EQ PANEL PLAY SEQUENCE EFFECT EG EFFECT VOLUME MASTER SETUP LFO EXT CTRL DISK SYSTEM CONTROL MIDI / CTRL MONITOR IMPORT MIDI Turn Knob 1 to select Reset. Turn action Push action Knob 1 Knob 2 Knob 3 Knob 1 Knob 2 - Knob 3 - Knob 4 - Knob 5 - This page selects how controllers are set when you switch into this program from another program. You can choose to retain the previous control-change values, or else to temporarily reset these values to 0. You can set the operation separately for each MIDI channel. For more information, refer to the supplementary explanation on the next page. Change Page Select P/S • Turn the knob to change to a different page within the CONTROL function. Available pages are: PgmCtl1, PgmCtl2 and Reset (this page). • Push the knob to move to the Program/Sample Selection screen. (95) MIDICh = 1,...,16 Selects the MIDI Receive Channel. After selecting the channel, you can use Knob 3 to select whether controllers are reset for the samples that play on that channel (see next page).You can then repeat this sequence as necessary: Use Knob 2 to select another channel, then use Knob 3 to enable or disable controller reset for that channel. CtlReset = off, on Selects whether the controller control-change values currently set for the previous program reinitialize to 0 when you switch into this program. You can set the operation separately for each MIDI Receive Channel. off Maintain previous values. on Return values to 0. Chapter 4 PLAY Mode 141