Yamaha A3000 Owner's Manual - Page 300

MASTER Function MASTER Function Use this function to adjust the system's output pitch, to adjust the level to the stereo outputs, and to set an assignable-output destination for the stereo output signal. MASTER - Tuning Sets the system-wide tuning. PLAY EDIT REC DISK UTILITY PROGRAM SAMPLE EASY EDIT TRIM / LOOP MAP / OUT FILTER RECORD SETUP METER PROGRAM SAMPLE SEQUENCE TOTAL EQ PANEL PLAY SEQUENCE EFFECT EG EFFECT VOLUME MASTER SETUP LFO EXT CTRL DISK SYSTEM CONTROL MIDI / CTRL MONITOR IMPORT MIDI Turn Knob 1 to select Tuning. Turn action Push action Knob 1 Knob 2 Knob 3 Knob 1 Knob 2 - Knob 3 - Knob 4 - Knob 5 - Use this page to adjust the tuning (shift the pitch) of all system output. The lower right of the screen indicates the degree of pitch shift, with respect to note A3. The value to the left of the arrow indicates the normal frequency for A3 (which is 440Hz), while the value to the right indicates the "tuned" frequency. Change Page Select P/S • Turn the knob to switch between the function's Tuning and StOut pages. • Push the knob to move to the Program/Sample Selection screen. (95) Coarse = -127,...,+127 Turn the knob to adjust the tuning, in semitone increments. Fine = -63,...,+63 Turn the knob to adjust the tuning in increments of 1.171875 cent. (Note: 100␣ cents = 1 semitone) 298 Chapter 8 UTILITY Mode