Yamaha A3000 Owner's Manual - Page 253

COMMAND Pages COPY Copies the contents of the selected volume into another volume. PLAY EDIT REC DISK UTILITY PROGRAM SAMPLE EASY EDIT TRIM / LOOP MAP / OUT FILTER RECORD SETUP METER PROGRAM SAMPLE SEQUENCE TOTAL EQ PANEL PLAY SEQUENCE EFFECT EG EFFECT VOLUME MASTER SETUP LFO EXT CTRL DISK SYSTEM CONTROL MIDI / CTRL MONITOR IMPORT MIDI Press the COMMAND key, then turn Knob 1 to select >COPY. Turn action Push action Knob 1 Knob 3 Knobs 4, 5 Knob 1 Knob 2 - Knob 3 - Knob 4 - Knob 5 - • This command copies all data from one volume into another. The copy operation deletes (replaces) all data already existing in the destination volume. • You use this command page to select the destination volume only. You must select the source volume before you call this page. • Note that it is not possible to copy volumes to or from floppy disk. Change Page >COPY • Turn the knob to change to a different command page. • Push the knob when you are ready to execute the copy. The A3000 returns a confirmation screen. Push Knob 5 (>YES) to proceed with the copy, or Knob 4 (>NO) to cancel. Destination Type = Dsk, Vol Use this knob together with Knob 4 or 5 to select the destination volume for the copy. Dsk Use this to view or change the destination-disk setting. When you select Dsk, the identity of the currently selected disk appears above Knobs 4 and 5. If necessary, you can then turn either of those knobs to change the destination disk. Vol Use this to change the volume setting. When you select Vol, the name of the currently selected volume appears above Knobs 4 and 5. If necessary, you can then turn either of those knobs to change the destination volume. Destination Use either knob to select the destination disk or volume. Chapter 7 Chapter 7 DISK Mode 251