Yamaha A3000 Owner's Manual - Page 186

FILTER Function FILTER - FltSens (Filter Sensitivity) Selects the filter's velocity sensitivity. PLAY EDIT REC DISK UTILITY PROGRAM SAMPLE EASY EDIT TRIM / LOOP MAP / OUT FILTER RECORD SETUP METER PROGRAM SAMPLE SEQUENCE TOTAL EQ PANEL PLAY SEQUENCE EFFECT EG EFFECT VOLUME MASTER SETUP LFO EXT CTRL DISK SYSTEM CONTROL MIDI / CTRL MONITOR IMPORT MIDI Turn Knob 1 to select FltSens. Turn action Push action Knob 1 Knobs 2, 3 Knobs 4, 5 Knob 1 Knob 2 - Knob 3 - Knob 4 - Knob 5 - This page determines how velocity affects the filter's cutoff frequency and Q/Width value. Change Page Select P/S • Turn the knob to change to a different page within the FILTER function. Available pages are: Filter, FltSens (this page), FltScale, and EQ. • Push the knob to move to the Program/Sample Selection screen. (95) Vel → Cutoff = -63,...,+63 Determines how the cutoff frequency changes in response to velocity. If you set the value to 0, the cutoff frequency remains the same at all velocities. Positive values cause the cutoff frequency to move up as velocity increases, while negative values cause the frequency to move down as velocity increases. Vel → Q/Width = -63,...,+63 Determines how the Q/width value changes in response to velocity. If you set the value to 0, the Q/width value remains the same at all velocities. Positive values cause the value to increase as velocity increases, while negative values cause the value to decrease as velocity increases. 184 Chapter 5 EDIT Mode