Yamaha A3000 Owner's Manual - Page 62

ProgramEditing Memo • Notice that there was no need to go through this procedure for Program 001, which was ready to play immediately after the samples were recorded. This is because you set the ToPgm setting to on before you began to record (see page 40). This setting causes the recorded sample to map directly to the currently selected program. • Notice also that the keyboard ranges for all three samples are the same for both programs. This is because the range settings are stored with the samples, not with the program. The Voice AH sample is currently set for range C2 to B2, while Voice EE is set for C3 to B3, and Voice OH is set for C4 to B4. Next, let's try dropping the pitch of Voice AH by one octave, and then raising the pitch of Voice OH by the same amount. One way to do this would be to lower or raise each sample's internal pitch settings. But this would also change the sound of Program 001, since the pitch settings are stored with the sample and affect all programs in which the sample is used. To limit our change to Program 002 only, we will instead use the Easy Edit feature to adjust the pitch. 9. Press the third (EASY EDIT) function key. 10. Press Knob 1, then turn Knob 2 or Knob 3 to select Voice AH for easy editing. Then press Knob 1 again. 11. Turn Knob 2 or Knob 3 to select the Tune Coarse edit parameter. 60 Chapter 2 Trying It Out