Yamaha A3000 Owner's Manual - Page 97

Chapter 4 Program & Sample Selection Screen Program & Sample Selection Screen The A3000 includes a special selection screen that you can access at almost any time by pushing Knob 1. You can then use the screen to select a sample or program for playback or editing, and to set a number of other features as described below. This screen is unlike other screens in that you can select it regardless of the current mode or function. Important You cannot access this screen while the COMMAND key is engaged (while the key's indicator lamp is on), since Knob 1 is assigned a different operation in this cases. Be sure to release the COMMAND key before trying to select a sample or program. FYI This special screen is provided as a convenience, since program and sample selection is such a frequent operation. The parameters that you set here are the same as (are linked to) the parameters offered by the following regular screens. • PLAY mode, PROGRAM function: Program selection, program name. (110) • PLAY mode, SAMPLE function: Sample selection, sample name. (112) PROGRAM/SAMPLE Selection Screen Use this screen to select a program or sample for playback or editing, or to switch "sample solo" or "MIDI to sample" features ON or OFF. PLAY EDIT REC DISK UTILITY PROGRAM SAMPLE EASY EDIT TRIM / LOOP MAP / OUT FILTER RECORD SETUP METER PROGRAM SAMPLE SEQUENCE TOTAL EQ PANEL PLAY SEQUENCE EFFECT EG EFFECT VOLUME MASTER SETUP LFO EXT CTRL DISK SYSTEM CONTROL MIDI / CTRL MONITOR IMPORT MIDI Push Knob 1. Turn action Push action Knob 1 Knob 2 - Knob 3 - Knob 4 - Knob 5 - You use this screen to select a program or sample for playback or editing; to change the name of a sample or program; to enable or disable the "sample solo" feature, and to enable or disable the "MIDI to sample" feature. All of these operations are described on the next page. Chapter 4 PLAY Mode 95