Yamaha A3000 Owner's Manual - Page 182

MAP/OUT Function MAP/OUT - LvlScale (Level Scaling) Sets the relation between output level and keyboard location. PLAY EDIT REC DISK UTILITY PROGRAM SAMPLE EASY EDIT TRIM / LOOP MAP / OUT FILTER RECORD SETUP METER PROGRAM SAMPLE SEQUENCE TOTAL EQ PANEL PLAY SEQUENCE EFFECT EG EFFECT VOLUME MASTER SETUP LFO EXT CTRL DISK SYSTEM CONTROL MIDI / CTRL MONITOR IMPORT MIDI Turn Knob 1 to select LvlScale. Turn action Push action Knob 1 Knob 2 - Knob 3 Knob 4 Knob 5 - This page determines how the sample's output level varies across the keyboard. The following illustration shows the relationship. All notes from BP1 down produce sound at Level 1, while all notes from BP2 up produce sound at Level 2. The sound level changes at a constant rate over the keyboard range BP1 to BP2. Level Level2 Level1 Pitch (Note) BP1 BP2 FYI • Certain samples seem to get louder as pitch increases, while certain others seem to become softer with rising pitch. The level-scaling feature described here lets you correct for these variations, allowing you to produce an apparently uniform playback level over the entire keyboard. • You can use the Note setting in the UTILITY | SYSTEM Display page (302) to select whether key values for the BP1 and BP2 settings are shown by name ("C-2" to "G8") or by the corresponding MIDI note number (0 to 127). Descriptions below assume that you are using name display. 180 Chapter 5 EDIT Mode