Yamaha A3000 Owner's Manual - Page 232

SETUP Function SETUP - Target Selects the recording method, sets the sample name, and assigns the sample to a program. PLAY EDIT REC DISK UTILITY PROGRAM SAMPLE EASY EDIT TRIM / LOOP MAP / OUT FILTER RECORD SETUP METER PROGRAM SAMPLE SEQUENCE TOTAL EQ PANEL PLAY SEQUENCE EFFECT EG EFFECT VOLUME MASTER SETUP LFO EXT CTRL DISK SYSTEM CONTROL MIDI / CTRL MONITOR IMPORT MIDI Turn Knob 1 to select Target. Turn action Push action Knob 1 Knob 2 Knob 1 Knob 2 - Knob 3 - Knob 4 - Knob 5 - Use this page to select the recording method (replacement, new, or serial), set the sample name, and assign the sample to a program. Change Page Select P/S • Turn the knob to change to a different page within the SETUP function. Available pages are: RecData, Target (this page), KeyRnge, Trigger, and Process. • Push the knob to move to the Program/Sample Selection screen. (95) Sample = Replace, New, New+ This setting selects the recording method. Replace Record the new sound directly into the currently selected sample, overwriting (completely replacing) its waveform data. But retain all of the existing sample's parameter settings (key range, original key, etc.). New Record a new sample. New+ Record a series of new samples. • Note that Replace is not available if you have selected a sample bank rather than a sample. 230 Chapter 6 RECORDING Mode