Yamaha A3000 Owner's Manual - Page 224

COMMAND Pages Knob 3 Knobs 4, 5 AllPgm(wp) Edited AllSmp Smp(Bank) Saves all usable programs, together with all samples used by these programs, to the destination volume on disk. Does not save any sequences. Saves only those samples that are used with at least one program (does not save unused samples). This operation erases all data already existing in the destination disk volume. Saves all new data to the destination volume (all new and all edited objects that have not yet been saved to disk in their current form). Does not save objects that have not been changed since the most recent disk load. Saves all samples into the destination volume. Saves the currently selected sample (or sample bank) to the destination volume. If a sample bank is selected, the A3000 also saves all of the samples used in the bank. Destination Type = Dsk, Vol Use this knob together with Knob 4 or 5 to select the destination for the save. Dsk Use this to view or change the destination-disk setting. When you select Dsk, the identity of the currently selected disk appears above Knobs 4 and 5. If necessary, you can then turn either of those knobs to change the destination disk. Vol Use this to view or change the volume setting. When you select Vol, the name of the currently selected volume appears above Knobs 4 and 5. If necessary, you can then turn either of those knobs to change the destination volume Destination Use either of these knobs to select the destination disk or volume 222 Chapter 6 RECORDING Mode