Yamaha A3000 Owner's Manual - Page 115
ToPgm, >SAVE
UPC - 027108936673
View all Yamaha A3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
SAMPLE Function Knob 4 Knob 5 ToPgm = off, on • Use the ToPgm (assign-to-program) switch to assign or de-assign the selected sample to the currently selected program. Set the switch on if you want the program to produce the sound of the sample, or off if you do not. • You cannot set the switch for samples that belong to a sample bank (since you must assign or de-assign the entire bank). If Knob 2 or 3 selects a sample that belongs to a bank, therefore, the ToPgm setting is blanked out (a "- - -" appears in the setting area). • Selecting too many overlapped samples (samples with identical or overlapping key ranges) may cause a delay in playback. In general, you should set your program up such that no key (on the keyboard) produces sound from more than four monaural samples (or 2 stereo samples). >SAVE • Push this knob to save the selected sample or sample bank. The A3000 then returns a confirmation screen. Push Knob 5 (>YES) to execute the save, or Knob 4 (>NO) to cancel. • If you select a sample bank, the A3000 will also save all samples within the bank. • Note that this operation always saves to the currently selected disk volume (266). If you wish to save to a different volume, do not use this screen. Use the SAVE command page instead (press the COMMAND key and go to the >SAVE command page). (100). Chapter 4 Chapter 4 PLAY Mode 113